The Silent Knight 6808 Addressable Fire Alarm Control Panel features a built-in annunciator that can also be used to program the system. FEATURES and SPECS: – The 6808 has one signaling line circuit (SLC) that supports 99 SK detectors and 99 SK modules or 127 SD protocol devices. 6.0A of output power is available through 4 sets of terminals for notification. Each circuit is power limited per UL 864 and can source up to 3.0A. The constant auxiliary power load must not exceed 3.0A max for normal standby. Reports events to central station by point or by zone. UL Listed for pre-action and deluge releasing systems. Two general purpose Form C programmable relays. One Form C Trouble Relay. Basic system operation can be performed using a key or a user code. Can be used with Model 5865-3, 5865-4, and 5880 in any combination for a total of eight devices on one control panel. Printing of event log available through the Model 5824 serial/parallel printer interface module. 250 software zones, 250 output groups. Add notification/auxiliary power circuits with each 5496 NAC Expander or 5895XL Power supply. The system can support a maximum of eight Intelligent Power modules, either the 5895XL or 5496, in any combination. Built-in synchronization support for AMSECO, Gentex, System Sensor, and Wheelock notification appliances.
Comments are closed.