Lot of Simplex 4002 Fire Alarm Control Panel Boards FOR PARTS/REPAIR ONLY

Lot_of_Simplex_4002_Fire_Alarm_Control_Panel_Boards_FOR_PARTS_REPAIR_ONLY_01_pd
Lot of Simplex 4002 Fire Alarm Control Panel Boards FOR PARTS/REPAIR ONLY
Lot of Simplex 4002 Fire Alarm Control Panel Boards FOR PARTS/REPAIR ONLY
Lot of Simplex 4002 Fire Alarm Control Panel Boards FOR PARTS/REPAIR ONLY
Lot of Simplex 4002 Fire Alarm Control Panel Boards FOR PARTS/REPAIR ONLY
Lot of Simplex 4002 Fire Alarm Control Panel Boards FOR PARTS/REPAIR ONLY

Lot of Simplex 4002 Fire Alarm Control Panel Boards FOR PARTS/REPAIR ONLY
Lot of Simplex 4002 Fire Alarm Control Panel FOR PARTS/REPAIR ONLY. For parts, see below.. This lot contains the following. (2x) 4002 CPUs. (2x) 8-Zone Monitor Cards. (2x) Signal Cards. (1x) 4-Zone Monitor Card. Only what is seen in the pictures are included. Both CPUs indicate a ground fault and NAC/relays do not work. Zone cards appear to be operational although LEDs are dim. Status of signal cards is unknown due to issues with both CPUs. Suspect a bad timer chip or component for both CPUs. Power supply and other parts on CPUs seem to be OK. One CPU had a blown AC power fuse which was replaced. The 4002 is a conventional fire alarm panel by Simplex. The base panel consists of 8 zones and 2 NACs, but is expandable up to 6 NACs and 32 zones. Other modules, such as: relay, fan control, and battery meter can be installed on a 4002 system. The system configuration can be adjusted via DIP switches on the CPU.
Lot of Simplex 4002 Fire Alarm Control Panel Boards FOR PARTS/REPAIR ONLY

Notifier Sfp-10ud Ten Zone 7 Amp Fire Alarm Control Panel With Enclosure

Notifier_Sfp_10ud_Ten_Zone_7_Amp_Fire_Alarm_Control_Panel_With_Enclosure_01_smii
Notifier Sfp-10ud Ten Zone 7 Amp Fire Alarm Control Panel With Enclosure
Notifier Sfp-10ud Ten Zone 7 Amp Fire Alarm Control Panel With Enclosure
Notifier Sfp-10ud Ten Zone 7 Amp Fire Alarm Control Panel With Enclosure
Notifier Sfp-10ud Ten Zone 7 Amp Fire Alarm Control Panel With Enclosure
Notifier Sfp-10ud Ten Zone 7 Amp Fire Alarm Control Panel With Enclosure
Notifier Sfp-10ud Ten Zone 7 Amp Fire Alarm Control Panel With Enclosure
Notifier Sfp-10ud Ten Zone 7 Amp Fire Alarm Control Panel With Enclosure
Notifier Sfp-10ud Ten Zone 7 Amp Fire Alarm Control Panel With Enclosure
Notifier Sfp-10ud Ten Zone 7 Amp Fire Alarm Control Panel With Enclosure
Notifier Sfp-10ud Ten Zone 7 Amp Fire Alarm Control Panel With Enclosure
Notifier Sfp-10ud Ten Zone 7 Amp Fire Alarm Control Panel With Enclosure
Notifier Sfp-10ud Ten Zone 7 Amp Fire Alarm Control Panel With Enclosure
Notifier Sfp-10ud Ten Zone 7 Amp Fire Alarm Control Panel With Enclosure
Notifier Sfp-10ud Ten Zone 7 Amp Fire Alarm Control Panel With Enclosure
Notifier Sfp-10ud Ten Zone 7 Amp Fire Alarm Control Panel With Enclosure
Notifier Sfp-10ud Ten Zone 7 Amp Fire Alarm Control Panel With Enclosure
Notifier Sfp-10ud Ten Zone 7 Amp Fire Alarm Control Panel With Enclosure
Notifier Sfp-10ud Ten Zone 7 Amp Fire Alarm Control Panel With Enclosure
Notifier Sfp-10ud Ten Zone 7 Amp Fire Alarm Control Panel With Enclosure
Notifier Sfp-10ud Ten Zone 7 Amp Fire Alarm Control Panel With Enclosure
Notifier Sfp-10ud Ten Zone 7 Amp Fire Alarm Control Panel With Enclosure

Notifier Sfp-10ud Ten Zone 7 Amp Fire Alarm Control Panel With Enclosure
NOTIFIER SFP-10UD TEN ZONE 7 AMP FIRE ALARM CONTROL PANEL WITH ENCLOSURE. I INSTALLED THE RESISTORS AND TURNED IT ON JUST TO BE SURE. DATE CODES ON ENCLOSURE AND CPU MATCH. NO KNOCKOUTS REMOVED FROM ENCLOSURE. FIRMWARE VERSION 3.1 B2. HARDWARE PACK INCLUDES 2 KEYS, BATTERY CABLES, AND GROUND STRAP. HARDWARE PACK IS NOT OEM. SEE PICTURES FOR DETAILS.
Notifier Sfp-10ud Ten Zone 7 Amp Fire Alarm Control Panel With Enclosure

Bosch FPD-7024-DI Fire Alarm Control Panel

Bosch_FPD_7024_DI_Fire_Alarm_Control_Panel_01_we
Bosch FPD-7024-DI Fire Alarm Control Panel
Bosch FPD-7024-DI Fire Alarm Control Panel
Bosch FPD-7024-DI Fire Alarm Control Panel
Bosch FPD-7024-DI Fire Alarm Control Panel
Bosch FPD-7024-DI Fire Alarm Control Panel
Bosch FPD-7024-DI Fire Alarm Control Panel

Bosch FPD-7024-DI Fire Alarm Control Panel
FPD-7024-DI Fire alarm control panels. Fire Panel, 4 Zone 24V with Sleeve. Four initiating zones (expandable to eight) with up to 20 two-wire smoke detectors per zone. Programmable through keypads or remote programming software (RPS) through a Conettix interface module or over the public switched telephone network (PSTN). Two notification appliance circuits (NACs) on board with a shared internal regulated 24 VFWR, 4 A NAC power supply. Easily converts to addressable with the addition of a MUX expansion module. The FPD-7024 Family FACPs can be used in commercial, retail, and public building applications. They are listed by UL for central station, local, auxiliary, and remote station systems. The FACPs support four on-board initiating zones that can be expanded to eight using the FPC-7034 Four-point expander. Each initiating zone supports two-wire and four-wire detectors configurable as Class A or Class B loops. Each zone can support up to 20 two-wire detectors, or any number of four-wire detectors depending on available power. Each FACP has a built-in digital fire alarm communicator transmitter (DACT). Enhance the FPD-7024 conventional system features by adding an FPE-7039 or D7039 MUX expansion module. Adding a MUX expansion module to the FACP turns the conventional FACP into an addressable FACP. The MUX expansion module adds up to 247 addressable points to the base system. It also adds an additional 400 events to the history buffer for a total of 499 events. The module increases the number of programmable relay outputs from 19 to 59 and expands system users to 100. The FPE-7039 allows you to use FPE-7024-ISO MUX bus isolator modules. The isolator modules prevent failure of the entire bus when there is a short on the bus.
Bosch FPD-7024-DI Fire Alarm Control Panel

Fire-Lite LCD-80F S624 BJ-8050 Fire Alarm Control Panel Annunciator

Fire_Lite_LCD_80F_S624_BJ_8050_Fire_Alarm_Control_Panel_Annunciator_01_wxex
Fire-Lite LCD-80F S624 BJ-8050 Fire Alarm Control Panel Annunciator
Fire-Lite LCD-80F S624 BJ-8050 Fire Alarm Control Panel Annunciator

Fire-Lite LCD-80F S624 BJ-8050 Fire Alarm Control Panel Annunciator
This Fire-Lite LCD-80F S624 BJ-8050 Fire Alarm Control Panel Annunciator is a top-quality device designed to provide reliable fire protection. The panel is designed with high-quality materials to ensure durability and longevity. It is suitable for use in various industries and facilities, including businesses and industrial settings. The Fire-Lite brand is known for its high-quality fire protection equipment, and this model is no exception. The LCD-80F model features advanced technology and design, making it an excellent choice for anyone seeking reliable fire protection. This device is easy to install and operate, and it is designed to provide accurate and reliable fire detection.
Fire-Lite LCD-80F S624 BJ-8050 Fire Alarm Control Panel Annunciator

RYBB Fire-Lite 9200UD-PCA Fire Alarm Control Panel Board Replacement

RYBB_Fire_Lite_9200UD_PCA_Fire_Alarm_Control_Panel_Board_Replacement_01_dv
RYBB Fire-Lite 9200UD-PCA Fire Alarm Control Panel Board Replacement
RYBB Fire-Lite 9200UD-PCA Fire Alarm Control Panel Board Replacement
RYBB Fire-Lite 9200UD-PCA Fire Alarm Control Panel Board Replacement
RYBB Fire-Lite 9200UD-PCA Fire Alarm Control Panel Board Replacement
RYBB Fire-Lite 9200UD-PCA Fire Alarm Control Panel Board Replacement
RYBB Fire-Lite 9200UD-PCA Fire Alarm Control Panel Board Replacement
RYBB Fire-Lite 9200UD-PCA Fire Alarm Control Panel Board Replacement
RYBB Fire-Lite 9200UD-PCA Fire Alarm Control Panel Board Replacement
RYBB Fire-Lite 9200UD-PCA Fire Alarm Control Panel Board Replacement

RYBB Fire-Lite 9200UD-PCA Fire Alarm Control Panel Board Replacement
Recently removed from service. Not sure if passcode has been defaulted! Please view photos carefully to determine if this is the board you need. Version is handwritten in – appears to be 5. A combination of Fire Alarm Control Panel and Digital Alarm Communicator/Transmitter all on one circuit board. This compact, cost-effective, intelligent addressable control panel has an extensive list of powerful features. Please see photos for details. Thank you for viewing our item. RYBB Fire-Lite 9200UD-PCA Fire Alarm Control Panel Board Replacement. All sales are expected to be paid within 2 days. This is to avoid possible return situations. If you choose to return an item not in the condition is was received, up to 50% of the original price may be deducted. We spend a lot of time to acurately describe our items and appreciate you reading our entire listing. We reserve the right to deny cancellation requests. We use our right to report any fraudulent requests. We are honest and we expect the same from our buyers. This is our business. We stand behind the items we sell. Please address all questions before making offers or. Before opening return cases. We appreciate the opportunity to make things right rather than having unhappy customers. All photos you see are taken by us. We do not use stock photos or photo shop anything. What you see is the actual item you will receive. Please read all information in our listings carefully, we do take the time to make them as accurate as humanly possible. We do sell used items, in addition to our new items, and will do our best to describe its functionality and condition. All used items are tested to the best of our ability. They are the quickest way to reach us. Thank you for shopping with us! All messages are handled ASAP. Get images that make Supersized seem small. Showcase your items with Auctiva’s.
RYBB Fire-Lite 9200UD-PCA Fire Alarm Control Panel Board Replacement